Most servers can be upgraded, as well as increased as your demands expand; however, HPE’s ProLiant DL180 Gen10 has more extent for growth than a lot of. That’s many thanks to a second CPU outlet that permits you to move up to multiprocessor computing as and when you’re ready.
The access price, on the other hand, is reduced, with lightweight requirements. This modest sum gets you out of the beginning blocks with a six-core Xeon Scalable Bronze 3204 CPU, 16GB of DDR4 Smart Memory and eight LFF drive bays, cabled to the embedded HPE S100i software-based RAID controller.
For Free consultation [ปรึกษาฟรี, which is the term in Thai] with Quickserv, please visit the link.
Move up to the model on examination and you obtain an eight-core Silver 4208 CPU, a full house of 12 LFF drive bays as well as HPE’s Smart Variety P408i SATA/SAS3 RAID card with 2GB of cache as well as battery backup device. Plainly, this is a configuration prepared for storage-centric work, yet SFF followers will be pleased to understand that the standard eight-bay version can be updated to 16-24 bays, with the alternative to include two even more at the rear.
The motherboard has both interior USB 3 as well as microSD card slots, which you can utilize to boot into an embedded hypervisor. To avoid wasting storage space bays on boot media, HPE’s optional PCIe Enablement board supports a set of mirrored M. 2 SSDs to house your operating system, as well as is cabled to dedicated SATA user interfaces on the motherboard.
Internally, the server presents a tidy layout, with the Smart Array P408i RAID card residing in a port behind the motherboard, as well as cabled directly to the drive backplane. The server consists of a riser with three PCIe slots, kept in the area by a locking tab that can be quickly launched with a flick of the wrist. If you set up a second CPU, you can include an additional three-slot PCIe riser card, which fits alongside the PSU bay.